Optimization of Surveillance Systems in Industrial Areas Using CCTV Design Tools

Koko Lendra Wijaya; Hendro  Nurhadi

doi:10.36418/syntax-literate.v10i4.57698

Koko Lendra Wijaya Institut Teknologi Sepuluh November, Surabaya
Hendro Nurhadi Institut Teknologi Sepuluh November, Surabaya

DOI: https://doi.org/10.36418/syntax-literate.v10i4.57698

Keywords: CCTV Design Tools, Surveillance Systems, Optimization, Industrial Security

Abstract

Designing CCTV systems presents its own challenges, especially in choosing the right and accurate design tools. This study highlights the utilization of CCTV Design Tools, specifically the System Design Tool (SDT), in designing surveillance systems in complex industrial environments. SDT is used to simulate camera coverage, identify blind spots, and determine the optimal configuration of the system. The case study was conducted at a metal smelting plant that has four crucial areas: Production Zone, Storage Warehouse, Loading Dock, and Access Door/Perimeter. Simulation results show that the use of SDT can increase surveillance coverage by 92.5%, reduce blind spots by 7.5%, and optimize the number of cameras required by 20%. With a technical data-driven approach and precise visualization of camera placement, SDT proved effective in improving the efficiency of surveillance system design. These findings confirm the importance of using simulation technology in the development of reliable, efficient, and field-appropriate industrial security systems.

Downloads

Download data is not yet available.

References

C. Phillips, �A review of CCTV evaluations: Crime reduction effects and attitudes towards its use,� Crime Prev. Stud., vol. 10, pp. 123�155, 1999.Q. P. Denise Cuevas, J. P. Carlo Corachea, E. B. Escabel, and M. A. Lou Bautista, �Effectiveness of CCTV Cameras Installation In Crime Prevention,� Coll. Criminol. Res. J., vol. 7, pp. 40�43, 2016.
T. Teixeira, D. Jung, and A. Savvides, �Tasking networked CCTV cameras and mobile phones to identify and localize multiple people,� UbiComp�10 - Proc. 2010 ACM Conf. Ubiquitous Comput., no. September 2010, pp. 213�222, 2010, doi: 10.1145/1864349.1864367.
Gega Ryani Cahya Kurnia B. P., �Peran Kamera Pengawas Closed-Circuit Television (CCTV) dalam Kontra Terorisme,� J. Lemhannas RI, vol. 9, no. 4, pp. 100�116, 2021, doi: 10.55960/jlri.v9i4.418.
R. Amalia, �ANALISIS DAMPAK KAWASAN INDUSTRI TERHADAP AKTIVITAS PEREKONOMIAN MASYARAKAT PERSPEKTIF EKONOMI ISLAM (Studi Pada Desa Lematang Kecamatan Tanjung Bintang Kabupaten Lampung Selatan),� pp. 23�48, 2018.
T. Velea, L. Gherghe, V. Predica, and R. Krebs, �Heavy metal contamination in the vicinity of an industrial area near Bucharest.,� Environ. Sci. Pollut. Res. Int., vol. 16 Suppl 1, 2009, doi: 10.1007/s11356-008-0073-5.
E. O. Gyamfi et al., �Using 3D Tools to Design CCTV Monitoring System for Ghanaian University: A Case of C.K. Tedam University of Technology and Applied Sciences (CKT-UTAS),� Asian J. Res. Comput. Sci., vol. 14, no. September, pp. 130�146, 2022, doi: 10.9734/ajrcos/2022/v14i4298.
A. M. Heyns, �Optimisation of surveillance camera site locations and viewing angles using a novel multi-attribute, multi-objective genetic algorithm: A day/night anti-poaching application,� Comput. Environ. Urban Syst., vol. 88, no. April, p. 101638, 2021, doi: 10.1016/j.compenvurbsys.2021.101638.
E. L. Piza and B. C. Welsh, �CUNY Academic Works CCTV surveillance for crime prevention . A 40-year systematic review with meta-analysis How does access to this work benefit you?? Let us know?!,� 2019.
M. Drahansky et al., �We are IntechOpen , the world � s leading publisher of Open Access books Built by scientists , for scientists TOP 1 %,� Intech, vol. i, no. tourism, p. 13, 2016, doi: http://dx.doi.org/10.5772/57353.W. S. Choi, S. Y. Lee, and S. G. Choi, �Implementation and Design of a Zero-Day Intrusion Detection and Response System for Responding to Network Security Blind Spots,� Mob. Inf. Syst., vol. 2022, 2022, doi: 10.1155/2022/6743070.
E. L. Piza, A. M. Gilchrist, J. M. Caplan, L. W. Kennedy, and B. A. O�Hara, �The financial implications of merging proactive CCTV monitoring and directed police patrol: a cost�benefit analysis,� J. Exp. Criminol., vol. 12, no. 3, pp. 403�429, 2016, doi: 10.1007/s11292-016-9267-x.
A. Schilling and B. Werners, �Optimal information security expenditures considering budget constraints,� Pacific Asia Conf. Inf. Syst. PACIS 2015 - Proc., 2015.
S. Singh, S. Saurav, C. Shekhar, and A. Vohra, �Prototyping an Automated Video Surveillance System Using FPGAs,� Int. J. Image, Graph. Signal Process., vol. 8, no. 8, pp. 37�46, 2016, doi: 10.5815/ijigsp.2016.08.06.
P. Kocher, R. Lee, G. McGraw, A. Raghunathan, and S. Ravi, �Security as a new dimension in embedded system design,� Proc. - Des. Autom. Conf., no. January, pp. 753�760, 2004, doi: 10.1145/996566.996771.
�SDT_Operation_Guide_en.pdf.�
�3D CCTV Design tool use JVSG.pdf.�
Y. Kim and J. Jeong, �A Simulation-Based Approach to Evaluate the Performance of Automated Surveillance Camera Systems for Smart Cities,� Appl. Sci., vol. 13, no. 19, 2023, doi: 10.3390/app131910682.
�PT XYZ Layout (Refinery)_2023.pdf.�
�LAMPIRAN_ SDT CCTV Desain Tools.pdf.�